#3DBenchy printed in two types of water-soluble PVA filaments

#3DBenchy mad of two types of water-soluble PVA plastic

Here are two versions of the #3DBenchy torture-test boat, made of two types of water-soluble PVA plastic filament. 

The 3D-print settings are the usual as follows:

  • Scale: 1:1
  • Layer height: 0,2 mm
  • Infill: 10%
  • Print speed (extrusion): upp to 50 mm/s
  • Print speed (travel): upp to 150 mm/s
  • Print nozzle diameter: 0,4 mm